Flexible Crystalline Cememntitious Waterproofing Compound
Description
At micro level, shrinkage cracks from drying might create passageways for moisture infiltration. If problem occurs while crystals are still forming, micro-cracks up to 0.4mm can be bridged. If problems occur later, the water will infiltrate water reactive proofing chemicals, allowing the concrete to heal itself on a micro scale.
PENTENS T-308 FLEX technology enhances the natural hydration process in concrete, increases compressive strength over time and dramatically reduces cracks caused by shrinkage. PENTENS T-308 FLEX has the characteristic of apply self-sealing in 24 hours.
PENTENS T-308 FLEX can be applied as a second coating to reinforce PENTENS T-308M Crystalline Cementitious Waterproofing Compound.
For damp proof areas, T-308 FLEX can be applied to the concrete surface.
Uses
PENTENS T-308 FLEX is used to waterproof areas as indicated below:
Advantages
Packaging
Description
PENTENS T-308 FLEX is a two-component, penetrating cementitious, reactive crystalline nano-capsule core self-healing technology waterproofing material. The active chemicals which react with moisture and free lime in the concrete or cement-based materials will cause a catalytic reaction that creates a non-soluble crystalline formation which crystallizes in the pores and capillary tracks.
At micro level, shrinkage cracks from drying might create passageways for moisture infiltration. If problem occurs while crystals are still forming, micro-cracks up to 0.4mm can be bridged. If problems occur later, the water will infiltrate water reactive proofing chemicals, allowing the concrete to heal itself on a micro scale.
PENTENS T-308 FLEX technology enhances the natural hydration process in concrete, increases compressive strength over time and dramatically reduces cracks caused by shrinkage. PENTENS T-308 FLEX has the characteristic of apply self-sealing in 24 hours.
PENTENS T-308 FLEX can be applied as a second coating to reinforce PENTENS T-308M Crystalline Cementitious Waterproofing Compound.
For damp proof areas, T-308 FLEX can be applied to the concrete surface.
PENTENS T-308 FLEX is used to waterproof areas as indicated below:
- Basement floors and retaining walls
- Concrete flat roofs
- Water retaining / excluding structures
- Underground vaults and foundation
- Bridges and tunnels
- Lift pits
- Swimming pools
- Potable water tanks
- Water tanks, reservoirs, sewage and water treatment plants
- Internal & external parking structures
Advantages
- Low VOC.
- Environmentally friendly.
- Self-healing.
- Apply to both positive and negative concrete surface.
- Resistance agianst positive and negative hydrostatic pressure.
- Permanently sealed against the penetration of water from any direction.
- Highly resistant to aggresive chemicals.
- Aid in sealing the capillaries and minor shrinkage cracks up to 0.4mm by crystal formation.
- Non-toxic.
Packaging
- 10 kg / pail (A)
- 25 kg / bag (B)
view more about
Pentens
