FAST CURING POLYURETHANE TRAFFICABLE JOINT SEALANT

 

Description

---

Bostik Seal 'N' Flex FC Fast Curing Polyurethane Trafficable Joint Sealant is a fast cure high performance one component polyurethane elastomeric joint sealant. When fully cured; Bostik Seal ‘N’ Flex FC will provide a tough, flexible seal capable of cyclic expansion and compression to 50% of original joint width without primer on most substrates. Bostik Seal ‘N’ Flex FC is unaffected by ultra-violet radiation, atmospheric contamination or pollution. Its excellent weather ability enables it to retain its original properties after years of expose. (C.S.I.R.O. RILEM expose study).

 

Uses

---

• Trafficable – Plats, stairs, roads, runways, aprons, and pavements

• Vertical – Precast, block work, aluminums, plasterboards, timber and most common building substrates

• Pick Resistant – Prison, cells, schools, and public, amenties

• Chemical Resistant – Service stations, hangers, aprons and bonded areas

• Fungal Resistant – Wet areas, wash down bays, food processing

 

Advantages

---

• Fast-curing

• High strength

• Chemical resistant

• UV resistant

• Easy to apply

• Australia made

• Aromatic technology

• +25% movement

• Abrasion & pick resistant

• AS 4020

• Resistant to fungals attach AS 1157.2

• Acoustic properties

• ISO 9002

• No priming required for most substrates

• No discolouration

• Low modulus elastometric sealant

• Security applications

• Potable water approval

• Petroleum & wash down environment

• Chicken, poultry & food environment

• Paintable

Bostik Seal 'N' FLEX FC is commonly used in a variety of industrial and commercial applications, including sealing floor joints in warehouses, car parks, and other facilities with heavy vehicle traffic. Its fast-curing properties make it ideal for situations where downtime must be kept to a minimum, while its high strength and chemical resistance ensure that it will provide long-lasting protection for the joint.

 

Application

---

 

Limitation

---

 

• Should not be used in highly chlorinated areas such as swimming pools, spas etc.

• Should not be used in glazing applications subject to UV light radiation or direct sunlight exposure.

• Should not be applied or finished with wet tooling techniques, using solvents, water or detergent/ soap solutions.

• Should not be applied to unpredictable porous surfaces such as marble, limestone, or granite unless a standard of appearance has been agreed on as a result of testing for stain and/or discoloration.

• Do not use in interior or exterior structural sealing below the waterline in marine applications.

• Do not use in applications less than 5mm in width or less than 6mm in depth.

• Do not apply to surfaces with special protective or cosmetic coating such as mirrors, reflective glass or surfaces coated with Teflon, Polyethylene, Polypropylene or PTFE.

 

Colour

---

• Grey

• White

• Black

Packaging

---

• 600 ml / sausage (20 sausage / box)