Pentens

ONE COMPONENT WATER-BASED FLEXIBLE CEMENTITIOUS WATERPROOFING 

Description

PENTENS Easy Coat WP1+ is an one component water-based flexible cementitous waterproofing systems and easy to apply.

CEMENTITIOUS WATERPROOFING SLURRY 

Description

PENTENS AB BRUSH is cement based waterproofing coating incorporates 2 polymer components. Apply directly to concrete to prevent water infiltration.

CEMENTITIOUS WATERPROOFING COATING 

Description

PENTENS AB-BOND is cement based waterproofing coating incorporates 2 polymer components. Apply directly to concrete mortar to prevent water infiltration.

ACRYLIC CURE SILICONE SEALANT 

Description

PENTENS 607 is a white acrylic based gap filter in paste form for application from a cartridge.

NEUTRAL CURE SILICONE SEALANT 

Description

PENTENS 605 neutral cure silicone sealant is an environmentally friendly and low VOC material which is widely used for glazing, sealing and weatherprooing in all buildings,

ACETIC CURE SILICONE SEALANT 

Description

PENTENS 603 SILICONE is  ageneral purpose acetoxy silicone sealant formulated for general purpose glazing and sealing application where long term reliability is required.

CONSTRUCTION ADHESIVE SEALANT 

Description

PENTENS PT-606 SUPER NAILS is a one component, high performance, paste like construction adhesive sealant formulated to bond a variety of common construction materials.

WEATHER PROOF MASTIC SEALANT THAT BOND MOST MATERIAL 

Description

PENTENS AC-1  AWNING CAULK is a one component non-shrinking mastic sealant that is specifically formulated as a bedding or gasket-style sealant.

SINGLE COMPONENT POLYURETHANE JOINT SEALANT 

Description

PENTENS FLEX 609 is a single component polyurethane, cures to form a soft elastometric weatherproof seal and it is specifically designed for waterproofing and

SELF-ADHESIVE RUBBERIZED ASPHALT 

Description

PENTENS SEAL is a flexible polymer-modified bituminous strip with a matt grey vinyl-coated aluminum foil facing.

EPOXY PUTTY ADHESIVE 

Description

PENTENS E-Grout is a two component, pre-packed epoxy mortar based on epoxy resin for the bonding and repair of cracked concrete, brickwork, mansory or for wall and slab bedding bearing

PLASTICISING ACCELERATOR

Description

PENTENS Q-SET is a new generation, dual action liquid, high range water reducer and hardening accelerator for promoting a high early strength without negatively influencing final strengths.

POLYMER PATCHING REPAIR MORTAR


Description

PENTENS T-801 is a one component, thixotropic, polymer-modified, cementitious mortar which contains silica fume. Cured product produces waterproof and high strength mortar that enhances polymeric properties.

CERAMIC COATING

Description

PENTENS T-202 is a single component, water-based, ready-mixed, acrylic-based, coarse-textured decorative and protective finishing coat that can be applied over prepared concrete,

RESIN BONDED CORK FILLER BOARD

Description

PENTENS RBCF consists of granulated cork bound together with a synthethic resin.

RESIN BONDED CORK FILLER BOARD

Description

PENTENS RBCF consists of granulated cork bound together with a synthethic resin.

BITUMEN IMPREGNATED FILLER BOARD

Description

PENTENS BS FILLER BOARD offer an excellent compression resistance with perfect recovery characteristics.

BITUMEN IMPREGNATED FILLER BOARD

Description

PENTENS BS FILLER BOARD offer an excellent compression resistance with perfect recovery characteristics.

HIGH PERFORMANCE FIBERGLASS MESH

Description

PENTENS ACW-015 is an alkali-resistant woven glass fiber. It is made of neutral fiber glass, specially treated with alkali-resistant polypropylene liquid.

CHOPPED STRAND FIBERGLASS MAT

Description

PENTENS ACW-014 chopped strand fiberglass mat is made of medium-size strands of E-glass, held together by a powder binder which is extremely soluble in styrene.

NON-WOVEN POLYESTER FIBERGLASS FABRIC

Description

PENTENS ACW-013 is a non-woven polyester fiberglass. It is made of neutral fiber glass and polyester.

HIGH PRESSURE CRACK INJECTION SYSTEMS & EQUIPMENT

Description

PENTENS continuously develops and refines Crack Injection Systems and technology. High Pressure Polyurethane is a commonly and widely used system.

INTEGRAL LIQUID WATERPROOFING ADMIXTURE

Description

PENTENS WP is an integral waterproofing system specially designed for the complete and permanent waterproofing of mass and reinforced structures, readymixed and precast

HARDENING ACCELERATING ADMIXTURES

Description

PENTENS FAST-1 is a new generation hardening accelerator for concrete and mortar.