Fosroc

MONOLITHIC SURFACE HARDENING COMPOUND FOR FRESH CONCRETE FLOORS 

Description

Nitoflor Hardtop surface hardening compound is a quality controlled, factory blended powder which is

GENERAL PURPOSE NON-SHRINK CEMENTITIOUS GROUT


Description

Conbextra GP cementitious grout is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a flowing non-shrink grout for gap thicknesses of 10 to 100 mm.

LIQUID APPLIED, ELASTOMERIC, ONE COAT WATERPROOFING MEMBRANE


Description

Nitoproof 600 is a single component pitch modified liquid polyurethane. It cures by reaction with atmospheric moisture to form a tough elastomeric waterproof membrane.

ACRYLIC POLYMER MODIFIED CEMENTITOUS WATERPROOFING COATING FOR CONCRETE AND MASONRY SURFACES


Description

The acrylic polymer provides Brushbond (M) with exceptional adhesion, toughness and durability. When mixed, an easy brushable coating is produced.

TROWEL GRADE CEMENTITOUS CONCRETE AND MASONRY REINSTATEMENT MORTAR

Description

Renderoc TG is a single-component shrinkage compensated pre-packed repair mortar to which clean water is simply added on site.

HIGH STRENGTH, TROWEL GRADE, EPOXY RESIN FAIRING COAT, REPAIR AND BEDDING MORTAR AND ADHESIVE


Description

Nitomortar FC is a two component thixotropic, solvent free, compound based on epoxy resins, graded fillers and thixotropic agents.

NON TOXIC, EPOXY RESIN, PROTECTIVE COATING AND WATERPROOFING LINING FOR CONCRETE AND METAL


Description

Nitocote EP405 high gloss, non toxic, coating is based on solvent free, epoxy resins which contain pigments and fine fillers.

2 COMPONENTS HIGH BUILD ANTI CORROSION PRIMER FOR EXPOSED STEEL REINFORCEMENT FOR USE WITH FOSROC CONCRETE REPAIR MORTARS


Description

Nitoprime Zincrich is supplied as a 2-components grey coloured liquid based on metallic zinc.

SWELLABLE WATERSTOPS FOR IN-SITU CONCRETE


Description

The Supercast SW range consists of three swellable waterstop strips, Supercast SWX gun-applied paste, Supercast SW Adhesive and Nitoseal PU40A.

HIGH SWELL HYDROPHILIC WATERSTOP FOR IN-SITU CONCRETE


Description

Supercast SW30 is a swellable waterstop that can be installed and positively linked into conventional Supercast PVC waterstop networks.

Supercast SW30 is made from high performance synthetic elastomer strips.

SWELLABLE WATERSTOPS FOR IN-SITU CONCRETE


Description

The Supercast SW range consists of three swellable waterstop strips, Supercast SWX gun-applied paste, Supercast SW Adhesive and Nitoseal PU40A.

RAPID SETTING CEMENT-BASED, WATER-STOPPING MORTAR


Description

Renderoc Plug is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent, rapid setting mortar which is easy to apply in many difficult conditions.

PRIMER FOR THIOFLEX JOINTS SEALANTS


Description

Primer 7 is a low visosity one component solvent based priming system for concrete joints prior to the installation of Thioflex 600 joint sealants.

HOT POURED RUBBER BITUMEN JOINT SEALANT


Description

Hot-poured, rubber bitumen horizontal joint sealing compounds, black in colour. Four grades Nitoseal MBA2, Nitoseal MBA1, Nitoseal MB77 and Nitoseal MB99.

DECORATIVE WATERPROOFING TREATMENT FOR ROOFING


Description

Nitoproof RS is single component, water based acrylic copolymer thus providing prolonged durability and excellent weather resistance and its latex properties completely resist ozonolysis and other oxidative degradation.

MULTI-PURPOSE, RUBBERISED, BITUMEN EMULSION


Description

Nitoproof 30 is a rubber reinforced, bitumen emulsion. It is supplied as a single component liquid, dark brown in colour, which dries to form a black, flexible coating. Nitoproof 30 is applied by brush or squeegee.

BITUMEN EMULSION PROTECTIVE COATING


Description

Nitoproof 10 is a brown/black liquid blend of selected bitumens emulsified with water to give an easily applied protective coating.

NITOPRIME 31 IS USED FOR FLOORING WORK WITH THE NITOFLOR RESIN FLOORING RANGE, IT IS ALSO RECOMMENDED FOR SOME COATING SYSTEMS.


Description

Aromatic amine cured epoxy based primer.

HIGH PERFORMANCE, SOLVENT FREE, EPOXY RESIN FLOOR COATING SYSTEM


Description

Nitoflor FC150 is a solvent free system based on epoxy resins and curing agents specially selected for their ability to withstand chemical attack.

A SINGLE COMPONENT, PENETRATING SILANE-SILOXANE WHICH PENETRATES INTO POROUS SUBSTRATES AND THEN REACTS TO PRODUCE A BONDED WATER REPELLENT LINING.

HIGH BUILD EPOXY COATING FOR APPLICATIONS TO DAMP/WET SURFACES. A TWO PACK, SOLVENT FREE, EPOXY RESIN MATERIAL


Description

Nitocote EP403 is a two packs, solvent free, epoxy resin material. It is supplied in pre-measured quantities ready for site mixing and use.

HIGHLY CHEMICAL RESISTANT PROTECTIVE COATING DESIGNED TO PROVIDE PROTECTION TO CONCRETE AND STEEL STRUCTURES IN AGGRESSIVE CHEMICAL CONDITIONS


Description

Nitocote EN901 is a solvent free, highly crosslinked, high build epoxy-novolac-based coating.

FLEXIBLE CEMENTITIOUS COATING, USED FOR WATERPROOFING WATER RETAINING STRUCTURES AND WATER EXCLUDING STRUCTURES


Description

Nitocote CM210 two-component polymer modified cementitious coating is supplied in pre-packaged form.

POLYMER EMULSION, LIQUID MEMBRANE, CONCRETE CURING COMPOUND


Description

Concure P is a polymer emulsion liquid membrane curing compound, milky white in colour and cures to a clear film. It consists of a stable emulsion based on suitably processed non-toxic P.V.A. emulsion, plasticisers, etc.