2 Component (A+B) | 2 Bahagian (A+B)

 ULTIMATE-PERFORMANCE INJECTABLE EPOXY MORTAR WITH APPROVALS FOR REBAR CONNECTIONS AND HEAVY-DUTY ANCHORING


Uses

• Structural connections with post-installed rebar (e.g. slab extensions, wall/column connections, stairs, foundations, etc.

ULTIMATE-PERFORMANCE INJECTABLE HYBRID MORTAR WITH APPROVALS FOR POST-INSTALLED REBAR CONNECTIONS AND ANCHORING STRUCTURAL BASEPLATES


Uses

• Structural concrete connections with post-installed rebar

• Fastening secondary steel

Uses

• Fastening structural steel to hollow and solid masonry

• Cost-effective seismic retrofitting and structural strengthening of old masonry walls

HIGH-PERFORMANCE INJECTABLE EPOXY MORTAR WITH EVERYDAY APPROVALS FOR ANCHORING AND REBAR CONNECTIONS IN CONCRETE


Uses

• Substitution of misplaced / missing rebars

Uses

• Wide range of fastening applications in the medium load range in hollow block (with plastic sleeves), solid block and uncracked concrete where no approval is required

Description

YHCoat-931 Flex is a two-component cement-based waterproofing coating. After brushing, the waterproofing coating can form a seamless flexible film on the surface of substrate. The waterproofing coating has strong toughness and is able to resist the propagation of micro-cracks in the substrate.

Description

YHCoat-930 is a two-component polymer cement waterproof slurry, composed of a liquid made up of polymer emulsion and various additives, mixed with inorganic powder material consisting of cement and various fillers, prepared in a certain proportion.

EPOXY FLOOR / WALL TILE COLOURED GROUT FOR JOINTS 2 - 15MM

Description

SikaCeram 850 Design is a 2-part, epoxy floor / wall tile coloured grout dispensed using a double side-byside cartridge.

SIKA SPRAYER EQUIPMENT FOR SIKACERAM 850 DESIGN & SIKACERAM 855 - TWO COMPONENT EPOXY FLOOR / WALL TILE COLOURED GROUT

Description

This double side-by-side cartridge dispensing gun is designed for SikaCeram 850 Design

2-COMPONENT THIXOTROPIC EPOXY ADHESIVE

Description

Sikadur-31 CF Normal is a moisture tolerant, thixotropic, structural 2-component adhesive and repair mortar, based on a combination of epoxy resins and special fillers, designed

CEMENTITIOUS WATERPROOFING SLURRY AND PROTECTIVE COATING

Description

Previously known as SikaTop Seal 107.

POLYMER-MODIFIED, FLEXIBLE, CEMENTITIOUS WATERPROOFING COATING

Description

SikaTop® Seal-109 MY is a cementitious, two-part, polymer-modified flexible waterproofing coating. It is applied to concrete and mortar to prevent water infiltration.

CEMENTITIOUS WATERPROOFING COATING 

Description

PENTENS T-305 is a cement-based waterproofing coating which incorporates two polymer components.

UNIVERSAL ANCHORING ADHESIVE

Description

Styrenated polyester based 2-component anchoring adhesive.

EPOXY HIGH PERFORMANCE CHEMICAL ANCHORING ADHESIVE

Description

Sika AnchorFix-3030 is an epoxy resin based, 2-part, thixotropic, high performance anchoring adhesive for anchoring threaded rods and reinforcing bars in both cracked and un-cracked concrete dry or damp concrete.

FLEXIBLE CRYSTALLINE CEMENTITIOUS WATERPROOFING COMPOUND

Description

PENTENS T-308 FLEX is a two-component, penetrating cementitious, reactive crystalline nano-capsule core self-healing technology waterproofing material.

LOW VISCOSITY AND SEMI ELASTIC EPOXY RESIN

Description

A solvent-free, 2-component low viscosity and semi elastic liquid, based on epoxy resins. Especially for sealing into non-structural cracks and cavities in concrete.

HIGH PERFORMANCE EPOXY FLOOR COATING 

Description

PENTENS E-603 is a two-component solvent-based epoxy resin coating system that is designed specifically for industrial use.

CEMENTITIOUS WATERPROOFING SLURRY 

Description

PENTENS AB BRUSH is cement based waterproofing coating incorporates 2 polymer components. Apply directly to concrete to prevent water infiltration.

CEMENTITIOUS WATERPROOFING COATING 

Description

PENTENS AB-BOND is cement based waterproofing coating incorporates 2 polymer components. Apply directly to concrete mortar to prevent water infiltration.

EPOXY PUTTY ADHESIVE 

Description

PENTENS E-Grout is a two component, pre-packed epoxy mortar based on epoxy resin for the bonding and repair of cracked concrete, brickwork, mansory or for wall and slab bedding bearing

ACRYLIC POLYMER MODIFIED CEMENTITOUS WATERPROOFING COATING FOR CONCRETE AND MASONRY SURFACES


Description

The acrylic polymer provides Brushbond (M) with exceptional adhesion, toughness and durability. When mixed, an easy brushable coating is produced.

HIGH STRENGTH, TROWEL GRADE, EPOXY RESIN FAIRING COAT, REPAIR AND BEDDING MORTAR AND ADHESIVE


Description

Nitomortar FC is a two component thixotropic, solvent free, compound based on epoxy resins, graded fillers and thixotropic agents.

NON TOXIC, EPOXY RESIN, PROTECTIVE COATING AND WATERPROOFING LINING FOR CONCRETE AND METAL


Description

Nitocote EP405 high gloss, non toxic, coating is based on solvent free, epoxy resins which contain pigments and fine fillers.