Concrete Repair and Maintenance | Pembaikan Konkrit, Pentens

HIGH EFFICIENCY CONCRETE CURING COMPOUND 

Description

PENTENS CONC-CURE is a range of liquid curing compounds for the prevention of premature water loss in concrete.

ONE PART POLYURETHANE 

Description

Pentens PU-300 is a one-part polyurethane hydrophobic PU grouting material, specially designed for concrete construction joints and cold joints.

Description

Pentens High Pressure Injection Packer is used for injecting repair materials like epoxy or polyurethane into concrete cracks. It is 10cm long with a 13mm diameter, suitable for high-pressure applications in waterproofing and structural repairs.

Description

Pentens High Pressure Injection Packer is used for injecting repair materials like epoxy or polyurethane into concrete cracks. It is 10cm long with a 13mm diameter, suitable for high-pressure applications in waterproofing and structural repairs.

RAPID SETTING MORTAR FOR PLUGGING LEAKS

Description

PENTENS T-800 is a ready-to-use rich blend of special cements and chemical in single-part dry powder form that needs only the addition of clean water to produce an

QUICK SET HYDRAULIC CEMENT

Description

PENTENS WATERPLUG is a quick setting nonshrink hydraulic mortar and is packaged in powder form.

STANDARD NON-SHRINK GROUT

Description

PENTENS T-805 is a ready-to-use rich blend of cement and shrinkage-compensating agents requiring only the addition of water to produce a free-flowing, high strength grout.

MULTI FUNCTION BONDING AGENT


Description

PENTENS LATEX 108 is a one-component acrylic based liquid resin mixed with normal Portland cement mortar or white cement which is used as flexible adhesive, patching mortar, base coat etc.

TRANSPARENT PROTECTING ACRYLIC COATING

Description

PENTENS SLATE-SEAL 820 is a specially formulated colourless protective coating with added Ultra Violet (UV) additive for treatment of interior and exterior concrete

POLYURETHANE SPRAY FOAM INSULATION SYSTEM 

Description

PENTENS PU-130 is a two-component, 1:1 ratio, closed-cell polyurethane foam insulation system which produces a solid foam with exceptional compressive strength when

ANTI-FUNGAL COMPOUND COATING

Description

PENTENS DR.WALL is a rich combination of organic and inorganic chemical composition plus specific modification of quartz sand, cement and concrete.

SUPER HIGH PERFORMANCE MORTAR ADHESIVE STRENGTH ADDITIVE 

Description

PENTENS TA FLEX S1000 is a cement modifier, consisting of Ethylene-Vinyl Acetate copolymer (EVA) emulsion for enhancing the adhesion strength of mortar,

HIGH PERFORMANCE MORTAR ADHESIVE STRENGTH ADDITIVE 

Description

PENTENS TA FLEX F1000 is a cement modifier, is belonged to the copolymer for enhancing the adhesion strength of mortar, tile adhesive cement, plastering

BONDING AGENT & ADHESIVE STRENGTH ADDITIVE

Description

PENTENS TA FLEX M888 is a cement modifier, consisting of latex polymer emulsion for enhancing the adhesion strength of mortar, tile adhesive cement, plastering cement,

LATEX ADDITIVES WATERPROOFING 

Description

PENTENS AD-BOND LATEX cement modifier is belonged to the copolymer of styrene, being modified from MMA , and butadiene.

L-210 SYNTHETIC RUBBER BASED, WATERPROOF THERMAL INSULATION COATING 

Description

PENTENS EasySov WP5+ is a state-of-the art 5 in 1 multifunctional synthetic rubber based waterproofing product.

EPOXY PUTTY ADHESIVE 

Description

PENTENS E-Grout is a two component, pre-packed epoxy mortar based on epoxy resin for the bonding and repair of cracked concrete, brickwork, mansory or for wall and slab bedding bearing

POLYMER PATCHING REPAIR MORTAR


Description

PENTENS T-801 is a one component, thixotropic, polymer-modified, cementitious mortar which contains silica fume. Cured product produces waterproof and high strength mortar that enhances polymeric properties.

HIGH PRESSURE CRACK INJECTION SYSTEMS & EQUIPMENT

Description

PENTENS continuously develops and refines Crack Injection Systems and technology. High Pressure Polyurethane is a commonly and widely used system.

WATER-DISPERSED TWO-COMPONENT EPOXY RESIN

Description

PENTENS E-10 is a reactive two-component system, consisting of modified phenol-type epoxy resin (A-Comp.) and water-emulsified epoxy resin hardener (B-Comp.).

MULTI-FUNCTION BONDING AGENT

Description

PENTENS T-309 is a one-component, acrylic-based liquid resin mixed with normal Portland cement or white cement.

HIGH PERFORMANCE, CHEMICAL-RESISTANT EPOXY RESIN

Description

PENTE NS E-610 CR is a 100 % solid , pigmented, two-component solvent-free epoxy resin. It is highly resistant to acids, alkalis and a broad range of chemicals.

PIGMENTED, ANTI-STAIN WATERPROOFING PAINT

Description

PENTENS PU-825 anti-stain waterproofing paint is a pigmented type of PU-820, suitable to be used for natural stones, external walls, tiles, brickworks and concrete structure

BONDING MORTAR & REINFORCEMENT PROTECTION

Description

PENTENS T-306 is a one-component, cementitious, polymer-modified mortar containing silica fume and corrosion inhibitors.