concrete repair

PUMPABLE SHRINKAGE COMPENSATED CEMENTITIOUS GROUT

Description SikaGrout®-215 is a pumpable dual-shrinkage compensated, self-levelling, prebagged cementitious grout with extended working time to suit local ambient temperatures.

LOW VISCOSITY AND SEMI ELASTIC EPOXY RESIN


Description A solvent-free, 2-component low viscosity and semi elastic liquid, based on epoxy resins. Especially for sealing into non-structural cracks and cavities in concrete.

STRUCTURAL REPAIR MORTAR FOR HAND PLACED / WET SPRAY REPAIR MORTAR


Description
Sika MonoTop®-412 MY is a single component, fibre reinforced, low shrinkage structural repair mortar. Fast repairs to overhead, horizontal or vertical concrete or mortar surfaces above and below ground level.

READY- TO-USE ACRYLIC SKIM COAT


Description SikaWall®-603 Acrylic is a skim smoothing rendering paste that is used for levelling uneven surfaces and repairing surface defects in concrete, plasters and drywalls. A smooth surface is obtained by eliminating blemishes such as grooves, seams, fine cracks and blowholes.

HIGH EARLY STRENGTH POURABLE REPAIR MORTAR


Description Sika® Patch M MY is a pourable 1-part cementitious mortar for repair situations where high early strength is required.

Uses Fast repair mortar for level and slightly inclined concrete and mortar substrates where a rapid return to service is required.

HIGH STRENGTH SHRINKAGE COMPENSATED CEMENTITIOUS GROUT


Description SikaGrout®-220 is a high strength, non-shrink, self-levelling, prebagged cementitious grouting mortar with extended working time to suit local ambient temperatures.

MULTI-PURPOSE DUAL SHRINKAGE COMPENSATED CEMENTITIOUS GROUT


Description Formerly known as SikaGrout®-214. SikaGrout®-214 MY is a dual-shrinkage compensated self-levelling, premixed cementitious grout with extended working time to suit local ambient temperatures.

PUMPABLE NON-SHRINK CEMENTITIOUS GROUT


Description SikaGrout® P is a pumpable shrinkage-compensated self-levelling, cementitious grouting mortar.

HIGH PERFORMANCE, ONE PART, CEMENTITIOUS POLYMER MODIFIED FINISH SKIMCOAT


Description Sika MonoTop®-711 MY is a high performance, one part, cementitious polymer modified based filling and levelling plasters for concrete surfaces. Sika MonoTop®-711 MY consists of finely crushed high quality limestone.

PORE SEALER / FAIRING COAT


Description Sika MonoTop®-620 MY is a one-part cementitious polymer-modified mortar containing silica fume. It is used as a superior finishing and protective top coat for concrete and concrete repair patches.

HIGH BUILD POLYMER MODIFIED CEMENTITIOUS PATCH REPAIR MORTAR


Description Sika MonoTop®-615 SD is a one-part, thixotropic, high build, polymer modified, cementitious mortar containing silica fume. Sika MonoTop®-615 SD cures to produce a medium strength mortar with enhanced polymeric properties.

BONDING MORTAR AND REINFORCEMENT PROTECTION


Description Sika MonoTop®-610 MY is a one-part, cementitious, polymer modified mortar containing silica fume and corrosion inhibitors.

POLYMER MODIFIED CEMENTITIOUS PATCH REPAIR MORTAR


Description Sika MonoTop® R-40 is a one part, thixotropic, polymer modified, cementitious mortar containing silica fume. It cures to produce a high strength mortar with enhanced polymeric properties.

POLYMER MODIFIED CEMENTITIOUS HAND PLACED / WET SPRAY REPAIR MORTAR


Description Sika MonoTop® R is a one part, thixotropic, polymer modified, cementitious mortar containing silica fume, cures to produce a high strength mortar with enhanced polymeric properties.

DUAL SHRINKAGE-COMPENSATED, FLOWING, CEMENTITIOUS REPAIR MATERIAL FOR FORMWORK REPAIRS

Description Sika® Microcrete-2000 is a dual shrinkage-compensated pre-bagged flowing micro concrete. It has very good flow properties and has been specifically developed to reduce heat generation.

SELF-COMPACTING CONCRETE FOR FORMWORK REPAIRS


Description Sika® Microcrete®-218 is a pre-bagged self-compacting concrete. It has very good flow properties and has been specifically developed to reduce heat generation. As such, large volume repairs may be performed without addition of aggregates.

SELF-COMPACTING CONCRETE FOR FORMWORK REPAIRS


Description Sika® Microcrete®-217 is a pre-bagged self-compacting concrete. It has very good flow properties and has been specifically developed to reduce heat generation. As such, large volume repairs may be performed without addition of aggregates.

HIGH PERFORMANCE, CEMENTITIOUS FLOOR SCREED


Description Sikafloor®-137 Screed is a durable, high quality cementitious premixed floor screed specially formulated for casting onto both old and new concrete floor.

LOW VISCOSITY INJECTION RESINS


Description Sikadur-52 MY is a two part, solvent free, low viscosity injection-liquids, based on high strength epoxy resins.