Epoxy | Epoksi

 ULTIMATE-PERFORMANCE INJECTABLE EPOXY MORTAR WITH APPROVALS FOR REBAR CONNECTIONS AND HEAVY-DUTY ANCHORING


Uses

• Structural connections with post-installed rebar (e.g. slab extensions, wall/column connections, stairs, foundations, etc.

ULTIMATE-PERFORMANCE INJECTABLE HYBRID MORTAR WITH APPROVALS FOR POST-INSTALLED REBAR CONNECTIONS AND ANCHORING STRUCTURAL BASEPLATES


Uses

• Structural concrete connections with post-installed rebar
• Fastening secondary steel structures (e.g.

EPOXY FLOOR / WALL TILE COLOURED GROUT FOR JOINTS 2 - 15MM

Description

SikaCeram 850 Design is a 2-part, epoxy floor / wall tile coloured grout dispensed using a double side-byside cartridge.

SIKA SPRAYER EQUIPMENT FOR SIKACERAM 850 DESIGN EPOXY FLOOR / WALL TILE COLOURED GROUT

Description

This double side-by-side cartridge dispensing gun is designed for SikaCeram 850 Design, a 2-part, epoxy floor / wall tile coloured

UNIVERSAL ANCHORING ADHESIVE

Description

Styrenated polyester based 2-component anchoring adhesive.

EPOXY HIGH PERFORMANCE CHEMICAL ANCHORING ADHESIVE

Description

Sika AnchorFix-3030 is an epoxy resin based, 2-part, thixotropic, high performance anchoring adhesive for anchoring threaded rods and reinforcing bars in both cracked and un-cracked concrete dry or damp concrete.

LOW VISCOSITY AND SEMI ELASTIC EPOXY RESIN

 

Description

A solvent-free, 2-component low viscosity and semi elastic liquid, based on epoxy resins. Especially for sealing into non-structural cracks and cavities in concrete.

EPOXY PUTTY ADHESIVE 

Description

PENTENS E-Grout is a two component, pre-packed epoxy mortar based on epoxy resin for the bonding and repair of cracked concrete, brickwork, mansory or for wall and slab bedding bearing

HIGH PERFORMANCE EPOXY FLOOR COATING 

Description

PENTENS E-603 is a two-component solvent-based epoxy resin coating system that is designed specifically for industrial use.

HIGH STRENGTH, TROWEL GRADE, EPOXY RESIN FAIRING COAT, REPAIR AND BEDDING MORTAR AND ADHESIVE


Description

Nitomortar FC is a two component thixotropic, solvent free, compound based on epoxy resins, graded fillers and thixotropic agents.

NON TOXIC, EPOXY RESIN, PROTECTIVE COATING AND WATERPROOFING LINING FOR CONCRETE AND METAL


Description

Nitocote EP405 high gloss, non toxic, coating is based on solvent free, epoxy resins which contain pigments and fine fillers.

SEGMENTAL BRIDGE ADHESIVE FOR USE AT +30 °C TO +45 °C

Description

Sikadur 31 SBA S-02 is a 2-part epoxy based moisture tolerant, thixotropic, structural adhesive especially formulated for segmental bridge construction.

LOW VISCOSITY INJECTION RESINS

Description

Sikadur-52 MY is a two part, solvent free, low viscosity injection-liquids, based on high strength epoxy resins.

WATER-DISPERSED TWO-COMPONENT EPOXY RESIN

Description

PENTENS E-10 is a reactive two-component system, consisting of modified phenol-type epoxy resin (A-Comp.) and water-emulsified epoxy resin hardener (B-Comp.).

TANK LINING EPOXY COATING 

Description

PENTENS E-501LN Tank Lining Epoxy is a 100% solid, modified epoxy coating designed for high performance waterproofing, chemical resistance and traffic compatibility under a wide range

HIGH PERFORMANCE, CHEMICAL-RESISTANT EPOXY RESIN

Description

PENTE NS E-610 CR is a 100 % solid , pigmented, two-component solvent-free epoxy resin. It is highly resistant to acids, alkalis and a broad range of chemicals.

High Performance Epoxy Floor Coating     Description PENTENS E-603 is a two-component solvent-based epoxy resin coating system that is designed specifically for industrial use.
The cured film forms a hard but flexible coating with excellent adhesion to clean concrete, sand/cement and granolothic screeds as well as certain metal surfaces.

Water-based Epoxy Coating     Description PENTENS E-620 is a two-component water-based epoxy floor coating system which consists of modified phenol-type epoxy resin (A-Comp.) and water-emulsified epoxy resin hardener (B-Comp.). This systems is formulated using water as a carrier and produced a hard film with outstanding matte appearance.

High Performance Free Flow Epoxy Grout

Description PENTENS E-300 is a  three-component mortar consisting of modified epoxy resin mixed with epoxy resin (A-Com.), hardener (B-Comp.) and specially graded aggregate (C-Comp.

2-Component Epoxy AB Glue


Description PENTENS EPTM A/B is a two-component pre-packed epoxy mortar based on epoxy resin for the bonding and repair of cracked concrete, brickwork and masonry, and for nosing and bedding of bearing pads.

Low Pressure Epoxy Crack Injection System


Description Semi-flexible and flexible sealants are usually the best solution for crack and joint-related problems. Nevertheless there are conditions where structural repair is necessary and specified. Structural strength is achieved by using PENTENS LP-504 Low Pressure Epoxy Crack Injection System.

Pentens Epoxy Decorative Floor System


Description PENTENS E-DECO601 is a new approach to seamless epoxy flooring which uses state of the art coating technology to provide a coating system with low odor, extremely low volatile organic content and excellent resistance against mechanical wear and chemical attack.

Anti-Static, Solvent-Free, Self-Leveling Epoxy Top Coat


Description PENTENS E-601AS is a self-leveling, anti-static, solvent free epoxy floor coating. The cured floor exhibits excellent antistatic properties and finishes to a smooth, seamless surface with an attractive appearance that can be easily maintained in a hygienic condition.

Anti-Static, Solvent-based, High Performance Epoxy Coating


Description PENTENS E-603AS is a self-smoothing anti-static, solvent type epoxy floor coating. The cured floor exhibits excellent antistatic properties and finishes to a smooth, seamless surface with an attractive appearance that can be easily maintained in a high hygienic condition.