Roofing | Bumbung, Waterproofing | Kalis Air

SEALANT THAT GIVES YOU A WATERTIGHT SEAL THAT LASTS.

Description

YHCoat-908 is made from pure acrylic emulsion and premium additives, offering moderate viscosity, easy application, strong adhesion to the base layer, and excellent sealing properties.

Description

YHCoat-900 UV-resistant elastic water-based liquid applied membrane is prepared from special emulsion, high-quality fillers, and functional additives.

ECONOMICAL LIQUID APPLIED ROOF WATERPROOFING WITH IMPROVED PONDING WATER CAPABILITY

Description

Sikalastic 590 is one component polyurethane – acrylic dispersion with improved water ponding resistance, excellent UV resistance, good crack bridging

HEATING RESISTANT WATERPROOFING COATING

Description

PENTENS T-200 is based on a newly developed Acrylic polymers which dramatically reduces solar heat absorption in either air-conditioned or non-air conditioned buildings.

MICRO-FIBER REINFORCED ACRYLIC WATERPROOFING COATING

Description

SikaCoat-555 is a water-based, one-component liquid waterproofing coating with self-priming and microfiber reinforcement.

ELASTIC AND SELF-PRIMING ACRYLIC WATERPROOFING COATING

Description

SikaCoat-333 is an elastic, self-priming, acrylic-based liquid-applied membrane with solar-reflective properties that reduce heat absorption, helping to lower

HIGH PERFORMANCE WATERPROOFING MEMBRANE

Description

HIGH PERFORMANCE WATERPROOFING MEMBRANE

Description

PENTENS TO-100 is a tough, pliable, high performance torch-on waterproofing membrane.

PLASTOMERIC BITUMINOUS MEMBRANE SURFACED WITH MINERAL GRANULES AND FLEXIBLE AT 0 °C

Description

SikaShield® P24 MG 4,5 kg/m² is an APP modified bituminous roof waterproofing membrane with a weight of 4,5 kg/m².

PLASTOMERIC BITUMINOUS MEMBRANE SURFACED WITH SAND AND FLEXIBLE AT 0 °C

Description

SikaShield® P24 S 3 mm is an APP modified bituminous waterproofing membrane with a thickness of 3 mm.

POLYURETHANE 1-PART RAPID CURE LIQUID APPLIED MEMBRANE FOR ROOF WATERPROOFING

Description

Sikalastic 632 R is a polyurethane, 1-part, rapid cure, cold-applied, moisture cured, crack- bridging, liquid applied membrane.

PRIMER FOR CONCRETE AND CEMENTITIOUS SUBSTRATES

Description

Sikalastic® U-Primer is a solvent-based, one component primer.

GLASS FIBER MAT (GFM) REINFORCEMENT SYSTEM

Description

Sika® Reemat Premium-120 is used as reinforcement with the liquid applied waterproofing membrane.

L-210 SYNTHETIC RUBBER BASED, WATERPROOF THERMAL INSULATION COATING 

Description

PENTENS EasySov WP5+ is a state-of-the art 5 in 1 multifunctional synthetic rubber based waterproofing product.

SELF-ADHESIVE RUBBERIZED ASPHALT 

Description

PENTENS SEAL is a flexible polymer-modified bituminous strip with a matt grey vinyl-coated aluminum foil facing.

LIQUID APPLIED, ELASTOMERIC, ONE COAT WATERPROOFING MEMBRANE


Description

Nitoproof 600 is a single component pitch modified liquid polyurethane. It cures by reaction with atmospheric moisture to form a tough elastomeric waterproof membrane.

READY-TO-USE, FLEXIBLE, LIQUID-APPLIED MEMBRANE FOR SEAMLESS EXPOSED WATERPROOFING OF ROOF SURFACES

Description

Aquaflex Roof 77 is a ready-to-use waterproofing membrane which is weather and UV resistant, and provide long-lasting

A CHOPPED-STRAND, FIBREGLASS MAT FOR TENSILE REINFORCEMENT OF LIQUID-APPLIED, WATERPROOFING MEMBRANE SYSTEMS


Description

Mapetex GRP 225 is a chopped-strand fibreglass mat, composed of randomly distributed glass fibres bonded with resin.

SELF-ADHERED REINFORCED WIND & WATER TILE UNDERLAYMENT

Description

Polystick TU PLUS is a self-adhered, dual reinforced waterproofing underlayment designed for use in adhesive foam or mechanically fastened roof tile

PREFABRICATED SELF ADHESIVE BITUMEN MEMBRANE PRODUCED USING ADESO TECHNOLOGY (NO FLAME. NO TORCH. NO FIRE RISK.

HIGH PERFORMANCE FIBERGLASS MESH

Description

PENTENS ACW-015 is an alkali-resistant woven glass fiber. It is made of neutral fiber glass, specially treated with alkali-resistant polypropylene liquid.

CHOPPED STRAND FIBERGLASS MAT

Description

PENTENS ACW-014 chopped strand fiberglass mat is made of medium-size strands of E-glass, held together by a powder binder which is extremely soluble in styrene.

NON-WOVEN POLYESTER FIBERGLASS FABRIC

Description

PENTENS ACW-013 is a non-woven polyester fiberglass. It is made of neutral fiber glass and polyester.